Showing posts with label parts. Show all posts
Showing posts with label parts. Show all posts
Friday, July 6
CV carb covers...
...are coming back soon you muther truckers. I have a batch being polished right now. These are all hand made, hand finished here in So-Cal. Not mass produced, so they are only available in small quantities. Here is a brushed finish one on Aaron Elliot's born free buildoff bike. Thanks for the support Aaron. Ignition covers are on the way too.
Spitfire Moto
I just got a package from Paul over at Spitfire. A couple pairs of their spring loaded struts to try out. Super nice quality. Looking forward to getting these on some bikes to skinny up the ass end.
Check them out at spitfiremotorcycles.com
Tuesday, July 3
Ghetto Thunderbird
We made some custom turn signals for Brian Forbes Dyna. Beveled glass lenses set into the shock covers.
Wednesday, May 30
Sunday, March 25
New parts
I've been too busy to update the blog with this stuff lately but here are a couple new offerings. Right now they are available exclusively through lowbrowcustoms.com but I'll have them on the webstore soon though. Brass Hollywood pegs and aluminum Bullseye CV carb covers that match our points covers. Brass CV covers are on the way also. Also soon we will have rubbermount sportster seats and rigid frame cobra king seats. Also working on some new seat models. Thanks for all of your support. Still making everything right here in southern California.
Saturday, March 17
Saturday, October 1
Thursday, September 8
Lowbrow vs Old Gold
I'm happy to announce that my stuff is now available through Lowbrow Customs, which means faster shipping for you guys, the same prices, and they even have a few items we don't have on our webstore, like the new stainless reserve bottles...go check it out
Lowbrow Customs/Old Gold Garage Co
Lowbrow Customs/Old Gold Garage Co
Tuesday, March 8
Brass ignition covers....
....are coming. Should be up online in a day or two. Hand cast, and hand finished red brass, with stainless hardware. only $45. I can't wait to put one on my ironhead...
will fit all cone bottom end big twins, and '71 up sportsters
will fit all cone bottom end big twins, and '71 up sportsters
Tuesday, February 22
"Dome" CV carb tops are finally here...
Now available at the OldGoldGarageCo webstore!...available in polished aluminum, polished brass, or cast look brass
These will fit any Harley with a Kehin CV carb, and installs in just a few minutes with a screwdriver. It will not affect the performance of the carb in any way.
These will fit any Harley with a Kehin CV carb, and installs in just a few minutes with a screwdriver. It will not affect the performance of the carb in any way.
Monday, January 10
It's a gas...
...tank
I pulled out one of my old gas tanks to hang at the tattoo shop. I've had this thing for over 10 years, bought it at the Hells Angels swapmeet they used to have in the valley. It's an old fiberglass tank and I'm in love with it. Its probably not safe to run on a bike but it sure looks cool. I'm building a steel version of it for one of my bikes. If it comes out cool maybe I'll make a few more and sell em...
I pulled out one of my old gas tanks to hang at the tattoo shop. I've had this thing for over 10 years, bought it at the Hells Angels swapmeet they used to have in the valley. It's an old fiberglass tank and I'm in love with it. Its probably not safe to run on a bike but it sure looks cool. I'm building a steel version of it for one of my bikes. If it comes out cool maybe I'll make a few more and sell em...
Wednesday, December 1
Sunday, November 14
Monday, November 1
Good shit
Tuesday, October 12
Casting couch
Saturday, October 9
Stromberg parts and rebuild kits
Tuesday, October 5
CV carb topper
CV carbs have always worked great, but unfortunatley they look like hell from the factory. I'm working on a few pieces to solve that problem, along with the finned bird deflector you've seen, I'm now working on these smooth rounded cast carb toppers. It replaces the lame ass plastic caps from the factory. They will be available in brass and aluminum and we will be adding a finned version as well. They will be for sale within a week or two.

pictured here with a stock plastic cap

pictured here with a stock plastic cap
Labels:
chrome dome,
CV carb,
fuck the factory,
old gold,
parts
Monday, September 27
Strombergs and Vampira prints are now up on the webstore...random huh?



yeah I know, but I like random, so go buy three chrome strombergs and a Vampira poster so I can hire someone to help me around here!
Labels:
97,
art,
chrome,
harpoon,
parts,
silkscreen,
three deuces
Thursday, September 9
it's official, the 97's are coming...


I just signed on to be an official Stromberg Carburetor dealer. I will carry the carbs and parts and they will be available in the store or online. The carbs are now available in fully polished chrome finish now. Bitchin. They also just came out with stainless linkage and fuel rails. I can't emphasize how nice these carbs are, and whatever you do dont try to save a few bucks by buying the Speedway versions, they just plain dont work, and are made out of aluminum in china.
Tuesday, August 10
Open House sponsor: Benchmark


Kim and Pat at Benchmark are making some bitchin parts, and they sent us a bunch of goodies for the open house. Glad to have them involved in the show...
check them out HERE
Subscribe to:
Posts (Atom)














